7 steps to replace the refrigerator water filter
When you wake up in the morning and walk to your refrigerator, you want to quench your thirst with cold. It is not refreshing and refreshing, but smelly and tasteful water, which will affect the good mood of the day. But don’t worry, if this happens, you can easily get fresh, refreshing and delicious water by replacing the refrigerator’s water filter. It is not difficult to replace the refrigerator water filter, just follow the following 7 simple steps.
1. Find the filter
Each refrigerator model has a different water filter location. If you are not sure where your refrigerator is, please refer to the refrigerator user manual. If you don't have a physical copy, you can find it online.
After you find the refrigerator water filter, you can evaluate how to best remove it. Some of them have a lid, which should be removed or opened first. Other models may have buttons or release valves. Similarly, it is recommended that you consult your device user guide or manual to determine the best removal method for all types of refrigerator water filters.
2. Find a suitable substitute
Refrigerator water filters are not a general market. The model and type of replacement filter you need depends on the brand and model of the device. If you don't know which one to buy, you can use our refrigerator filter finder to find or consult online customer service.
We provide many types of refrigerator water filters, such as EDR3RXD1 Water Filter, EDR2RXD1 Filter, EDR1RXD1 Refrigerator Water Filter, etc. In order to keep the water fresh and delicious, it is recommended to change it at least once every 6 months. Before replacing the old one, it is best to prepare a substitute. Then 3 to 5 concessions are a good choice.
3. Remove existing filters
Just like replacing the water filter model, their removal method varies from brand to brand. Don't discard the old filter until you are sure that the new filter is suitable! If your new filter does not work, you may need to put the old filter back in place until you find the correct water filter.
There are three different types of refrigerator water filters. See which one suits you.
In-line filters are usually found in older refrigerator models and connected to the water line. Replacing the built-in refrigerator water filter is a process because you need to turn off the water source and perform some steps. Find an in-depth tutorial here.
The screw-in filter is usually located on the back of the refrigerator. You can release them by turning them to the left. You may need to twist a bit to get them.
The push-in filter is built into your refrigerator and can be installed on the grill or inside the appliance. These usually have a release button and a cover that should be removed before installation.
If you really cannot remove the original water filter from the refrigerator, please call a professional to help you. You don't want to use too much force to damage your appliances!
4. Install the new filter
You can now put the shiny new refrigerator water filter at home! Since you have deleted the old one, you know which mechanism you have and how it works. Thankfully, installing a new filter is a simple and easy process!
Simply reverse the process you used to remove the filter to install the new filter. Before you start, be sure to read all the instructions carefully. Certain types of filters have a cover that needs to be removed, and other types of filters may also have special instructions.
5. Test the new filter
have a test! If possible, place a dry cloth or paper towel on the nearest shelf below. After rinsing the water filter and using water several times, check the cloth. If it is wet, it may be leaking and need to be tightened or reinstalled with a new water filter.
But don't drink it now!
6. Flush the filter
Run at least 3 gallon of water in your newly placed cleaning system! This will remove any impurities and properly filter before drinking.
If the water "spouts" or "bursts" several times when it comes out, don't panic, it's just air coming out of the waterline.
7. Enjoy refreshing and clean water
After you carefully follow all the above instructions, it's time to enjoy your water! Put a glass under the faucet, press it, and watch the clean water pour into your glass! Finally, enjoy your delicious clean water.
Your refrigerator is one of the most common and important appliances you own. It may also be one of the most expensive. Pay attention to the refrigerator water filter to keep your refrigerator working as long as possible. Don't wait until your refrigerator water tastes weird again to replace the outdated filter. Generally, you need to replace the water filter at least every six months. However, if your water is particularly hard or you use a lot of water, you may need to change the water more frequently.
If you are looking for a high-quality refrigerator with a price lower than that of a major manufacturer's brand, we recommend that you use ourfilters. They are reasonably priced, free shipping, and provide refreshing and clean water.
Posted by Ourfilters on Aug 18th , 2021
TAGS:
refrigerator water filter,
EDR3RXD1 Water Filter,
EDR2RXD1 Filter,
EDR1RXD1 Refrigerator Water Filter